All posts

How often should tenants change AC filters?

Oct 30, 2026

For most rentals, plan on a new AC filter every one to three months. Where a unit falls in that range depends on the filter and on who lives there.

A dirty filter is one of the cheapest problems a landlord can prevent, and it's easy to miss because it sits out of sight until the system struggles. Here's a schedule you can use, what to put in the lease, and how to know the work got done.

A simple filter schedule

These are common rules of thumb, not fixed rules. If the filter's manufacturer or the HVAC system's manual says something different, follow that.

  • Standard 1-inch filter: every 60 days.
  • 1-inch filter with pets or allergies: every 30 days.
  • 2-inch filter: every 60 to 90 days.
  • 4-inch or 5-inch filter: follow the manufacturer's rating. Thicker filters usually last longer, but how long depends on the home.

If you manage a mix of units, set one schedule per unit, not one for the whole portfolio. A one-person apartment and a house with three dogs won't load a filter at the same rate.

What changes the schedule

Shorten the schedule when any of these apply:

  • Pets. Hair and dander build up quickly, especially during shedding season.
  • More people. More activity means more dust and more hours of system use.
  • Heavy AC use. A system running all day in the summer pulls far more air through the filter than one running a few hours.
  • Dust and renovation. Nearby construction, drywall work, or a dusty area can clog a filter early.
  • Smoking. Smoke residue collects in the filter along with everything else.

When you aren't sure, check the filter. If you can't see light through it, or it looks gray and matted, it's time to replace it.

Why landlords should care

The filter belongs to the tenant's daily routine, but the HVAC system belongs to you. When a filter clogs, the system has to work harder to pull air through it. That can mean weaker cooling, higher utility bills, and more strain on the equipment.

A neglected filter can also lead to dirty coils or a frozen evaporator coil, and that often ends in a service call. A filter costs a few dollars. A visit from an HVAC technician costs a lot more.

What to put in the lease

If you expect tenants to change filters, say so in writing. A vague line about "routine upkeep" won't help much later. Spell out four things:

  1. Who buys the filter. Either you supply them or the tenant does.
  2. The filter size. Tenants can't buy the right one if they don't know the size.
  3. How often to change it. Use the schedule for that unit.
  4. How the tenant shows it's done. A dated photo is simple and hard to argue with.

Landlord and tenant rules vary by state and city, so have a local attorney review your lease language.

The hard part is follow-through

Most tenants don't skip filters on purpose. They forget, because nothing reminds them until the air stops feeling cold. And if you handle reminders yourself, every unit adds more calls, more texts, and another line on a spreadsheet.

A process that holds up has three parts:

  1. A reminder before the filter is due. Send it at the right time for each unit, not whenever you remember.
  2. Proof, not a promise. Ask for a photo of the new filter. "I changed it" doesn't tell you much when something breaks.
  3. A record. Keep the date and the photo for each unit, so you can see who's done and who's overdue.

That's the job AC Filter Check does for you. Add each unit's filter size and schedule, and tenants get a reminder with a private link. They take a photo of the new filter, with no app and no account, and your dashboard shows where every unit stands.